advanced power dual n-channel enhancement electronics corp. mode power mosfet low on-resistance bv dss 60v single drive requirement r ds(on) 50m surface mount package i d 5a rohs compliant & halogen-free description absolute maximum ratings symbol units v ds v v gs v i d @t a =25 a i d @t a =100 a i dm a p d @t a =25 w w/ t stg t j symbol value unit rthj-a 62.5 /w data and specifications subject to change without notice halogen-free product 201112293 total power dissipation 2 -55 to 150 maximum thermal resistance, junction-ambient 3 thermal data parameter operating junction temperature range -55 to 150 storage temperature range continuous drain current 3 , v gs @ 10v 3.2 pulsed drain current 1 30 + 25 continuous drain current 3 , v gs @ 10v 5 linear derating factor 0.016 1 AP9971AGM-HF parameter rating drain-source voltage 60 gate-source voltage advanced power mosfets from apec provide the designer with the best combination of fast switching, ruggedized device design, ultra low on-resistance and cost-effectiveness. s1 g1 s2 g2 d1 d1 d2 d2 so-8 g2 d2 s2 g1 d1 s1 the so-8 package is widely preferred for commercial-industrial surface mount applications and suited for low voltage applications such as dc/dc converters.
electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =250ua 60 - - v r ds(on) static drain-source on-resistance 2 v gs =10v, i d =5a - - 50 m v gs =4.5v, i d =2.5a - - 60 m v gs(th) gate threshold voltage v ds =v gs , i d =250ua 1 - 3 v g fs forward transconductance v ds =10v, i d =5a - 4.8 - s i dss drain-source leakage current v ds =60v, v gs =0v - - 1 ua drain-source leakage current (t j =70 o c) v ds =48v ,v gs =0v - - 25 ua i gss gate-source leakage v gs =+ 25v, v ds =0v - - + 100 na q g total gate charge 2 i d =5a - 17.5 28 nc q gs gate-source charge v ds =48v - 2 - nc q gd gate-drain ("miller") charge v gs =10v - 6.3 - nc t d(on) turn-on delay time 2 v ds =30v - 5.5 - ns t r rise time i d =5a - 12 - ns t d(off) turn-off delay time r g =3.3 ? ,v gs =10v - 18 - ns t f fall time r d =6 ? -4- ns c iss input capacitance v gs =0v - 650 1040 pf c oss output capacitance v ds =25v - 85 - pf c rss reverse transfer capacitance f=1.0mhz - 60 - pf source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =1.6a, v gs =0v - - 1.2 v t rr reverse recovery time i s =5a, v gs =0 v , - 27 - ns q rr reverse recovery charge di/dt=100a/s - 32 - nc notes: 1.pulse width limited by max. junction temperature. 2.pulse test 3.surface mounted on 1 in 2 copper pad of fr4 board ; 135 /w when mounted on min. copper pad. this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. apec does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. 2 AP9971AGM-HF
a p9971agm-h f fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fi g 5. forward characteristic o f fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 0 10 20 30 02468 v ds , drain-to-source voltage (v) i d , drain current (a) t a =25 o c 10v 7.0v 5.0v 4.5v v g =4.0v 0.8 1.2 1.6 2 2.4 -50 0 50 100 150 t j ,junction temperature ( o c) v gs(th) (v) 0 10 20 30 02468 v ds , drain-to-source voltage (v) i d , drain current (a) t a =150 o c v g =4.0v 10v 7.0v 5.0v 4.5v 0 2 4 6 8 10 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 v sd , source-to-drain voltage (v) i s (a) t j =25 o c t j =150 o c 0.4 0.8 1.2 1.6 2.0 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) v g =10v i d =5a 30 40 50 60 70 246810 v gs , gate-to-source voltage (v) r dson (m ) i d =5a t a =25 o c
ap9971agm-h f fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. switching time waveform fig 12. gate charge waveform 4 10 100 1000 10000 1 5 9 1317212529 v ds , drain-to-source voltage (v) c (pf) f=1.0mhz c iss c rss c oss 0 2 4 6 8 10 12 0 4 8 12162024 q g , total gate charge (nc) v gs , gate to source voltage (v) v ds =30v v ds =36v v ds =48v i d =5a t d(on) t r t d(off) t f v ds v gs 10% 90% q v g 10v q gs q gd q g charge 0.01 0.1 1 10 100 0.1 1 10 100 v ds , drain-to-source voltage (v) i d (a) t a =25 o c single pulse 100us 1ms 10ms 100ms 1s dc 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , pulse width (s) normalized thermal response (r thja ) 0.01 0.05 0.1 0.2 duty=0.5 single pulse p dm duty factor = t/t peak t j = p dm x r thja + t a t t rthja = 135 /w 0.02
|
